ABS/PVC
ABS/PVC blend sheet, such as Boltaron, offers some of the best aspects of these two common thermoplastics. Excellent for thermoforming applications, it maintains high consistency from lot to lot fabricating, and uniformity in deep draws and sharp corners.
Acrylic (Polymethyl Methacrylate, PMMA)
Acrylic, also known as Polymethyl Methacrylate (PMMA), is a thermoplastic that can be formed into a number of shapes, making it suitable for use in a broad range of industries and products.
Adhesive-Backed Vinyl
Adhesive backed vinyl material sees a broad spectrum of use in the sign and graphics industry. Digital and screen print grade films, plotter films, specialty films, vehicle wrap material, laminating films, and complementary tapes are all available from Polymershapes.
Aluminum Composite Material (ACM)
Aluminum Composite Material (ACM) is a rigid sheet made of two sheets of pre-finished aluminum, bonded to a polyethylene core. Light-weight, without sacrificing durability, ACM sheets are often used for outdoor signage, and channel letter backings.
Banner Media
A staple of the graphics industry, banner material is used in a variety of applications and settings. Grades are available for solvent, eco-solvent, UV, latex, and screen printing, in a range of widths, sizes, and thicknesses to meet your project needs.
ECTFE (Ethylene Chlorotrifluoroethylene)
ECTFE (ethylene chlorotrifluoroethylene) offers an excellent combination of properties for chemical and elevated temperature applications. Often used in the semiconductor industry, and cleanroom equipment, ECTFE is corrosion and chemical resistant, with flame resistant properties.
ETFE (Ethylene Tetrafluoroethylene)
Used in valves, fittings, bearings, pump components and electrical coatings, ETFE tubing is weather-resistant and inert to most solvents and chemicals. Versilon ETFE tubing is also radiation resistant.
Expanded Foam PVC
Expanded Foam PVC sheet is a versatile material, often used in the sign and graphics industry. Expanded closed-cell polyvinyl chloride (PVC) sheets are durable and rigid with a matte finish.
High Density Polyethylene (HDPE)
HDPE (High Density Polyethylene), part of the polyolefin family of materials, is a semi-crystalline thermoplastic material, with a continuous use temperature range of -50° F (-46° C) to 180° F (82° C).
Industrial PVC/CPVC
PVC is an amorphous thermoplastic material, with a range of continuous use temperatures varying by type (Type I, Type II or CPVC).
Interlocking PVC Panels
When strength, chemical and water resistance, and easy installation are needed, interlocking PVC panel solutions offer the perfect alternative to traditional drywall or FRP panels in agricultural, clinical, food preparation, or residential settings.
PBI (Polybenzimidazole)
PBI (polybenzimidazole) such as Duratron® from Mitsubishi Chemical Advanced Materials, features the highest mechanical properties of any plastic above 400°F as well as the lowest coefficient of thermal expansion and highest compressive strength of all unfilled plastics.
PEI (Polyetherimide, ULTEM™)
PEI (Polyetherimide) is an amorphous engineering thermoplastic offering exceptional mechanical, thermal and electrical properties. It can be easily machined with conventional metalworking tools, and can be painted, hot stamped, printed or metallized.
PI (Polyimide)
PI (Polyimide), is an imidized material with a continuous use temperature range of up to 580° F (304° C). It is categorized as an extreme performance material, and offers excellent heat resistance, lubricity, dimensional stability, and chemical resistance.
Polycarbonate
Polycarbonate, also referred to as PC, is a tough, impact-resistant, virtually unbreakable material used in wide variety of applications. It is an amorphous thermoplastic material, with a continuous use temperature range of up to 265° F (129° C).
Polycarbonate-ABS Blend (PC-ABS)
Polycarbonate-ABS blend sheet is an opaque, solid, low-gloss sheet, commonly known as LEXAN H6500. Commonly used in the bus & rail industry, this sheet offers excellent stiffness, as well as flame retardant properties.
PPSU (Polyphenylsulfone)
PPSU (Polyphenylsulfone) is an amorphous thermoplastic material, with a continuous use temperature range of up to 300° F (149° C).
PTFE (Polytetrafluoroethylene)
Polytetrafluoroethylene (PTFE) is a high molecular weight polymer with excellent thermal and electrical insulation properties, and a low coefficient of friction. It is a highly versatile plastic material useful in a broad range of high technology market segments and products, and its properties can be modified by additives such as glass fiber, carbon, or graphite.
PVC-Acrylic
PVC-Acrylic is a thermoformable, high-impact, fire-rated sheet for a variety of aerospace and industrial applications.
PVDF (Polyvinylidene Fluoride)
PVDF (polyvinylidene fluoride), sometimes known by the tradename Kynar®, is an engineering thermoplastic offering high purity, excellent chemical resistance, flame resistance, and abrasion resistance. Easy to weld, PVDF is often seen semiconductor equipment, tank liners, and various seals, fittings, valves, and pump parts.