ABS (Acrylonitrile Butadiene Styrene)
ABS (Acrylonitrile Butadiene Styrene) is an amorphous thermoplastic material, with a continuous use temperature range of -4° F (-20° C) to 176° F (80° C). It is categorized as a standard material, and offers a balanced combination of mechanical toughness, impact resistance, and ease of fabrication and thermoforming.
ABS/PVC
ABS/PVC blend sheet, such as Boltaron, offers some of the best aspects of these two common thermoplastics. Excellent for thermoforming applications, it maintains high consistency from lot to lot fabricating, and uniformity in deep draws and sharp corners.
Acetal (Polyoxymethylene, POM)
Acetal, also known as POM (Polyoxymethylene), is a semi-crystalline engineering thermoplastic material, with a continuous use temperature range of up to 180° F (82° C). Acetal offers high strength and stiffness coupled with high dimensional stability and ease of machining.
Acrylic (Polymethyl Methacrylate, PMMA)
Acrylic, also known as Polymethyl Methacrylate (PMMA), is a thermoplastic that can be formed into a number of shapes, making it suitable for use in a broad range of industries and products.
APET (Amorphous Polyethylene Terephthalate)
APET (Amorphous-Polyethylene Terephathalate) film is known for its glossy, clear appearance. Offering crystal clear transparency, along with excellent chemical resistance, APET film is a popular choice for medical facesheilds.
Composites & Processing Aids
Polymershapes can support your processing aid needs from several major manufacturers, these products include but are not limited to vacuum bag films; release films, liquids, and fabrics; adhesive and sealant tapes; autoclave valves and hoses; castable urethane elastomer; tooling resins, and tool support structures.
ECTFE (Ethylene Chlorotrifluoroethylene)
ECTFE (ethylene chlorotrifluoroethylene) offers an excellent combination of properties for chemical and elevated temperature applications. Often used in the semiconductor industry, and cleanroom equipment, ECTFE is corrosion and chemical resistant, with flame resistant properties.
High Density Polyethylene (HDPE)
HDPE (High Density Polyethylene), part of the polyolefin family of materials, is a semi-crystalline thermoplastic material, with a continuous use temperature range of -50° F (-46° C) to 180° F (82° C).
High Impact Polystyrene (HIPS)
HIPS (High Impact Polystyrene), also known as PS (Polystyrene), is an amorphous thermoplastic material, used in lower heat applications. It is categorized as a standard material, and offers ease of processing, high impact strength, and stiffness.
Interlocking PVC Panels
When strength, chemical and water resistance, and easy installation are needed, interlocking PVC panel solutions offer the perfect alternative to traditional drywall or FRP panels in agricultural, clinical, food preparation, or residential settings.
Low Density Polyethylene (LDPE)
LDPE (Low Density Polyethylene), also known as a polyolefin material, is a semi-crystalline thermoplastic material, with a continuous use temperature range of up to 200° F (93° C).
Nylon (Polyamide, PA)
Nylon is one of the original engineering thermoplastic materials. With an ideal balance of strength and toughness it finds use in a wide variety of industries and applications.
PAI (Polyamide-imide)
PAI (Polyamide-imide) is an imidized thermoplastic material, with a continuous use temperature range of up to 500° F (260° C).
PEEK (Polyetheretherketone)
PEEK (Polyetheretherketone) is a unique engineering thermoplastic offering high temperature resistance, toughness, rigidity, and creep resistance. It is resistant to a wide range of solvents, making it an excellent material for use in a wide spectrum of applications where thermal, chemical and combustion properties are critical to performance.
PEI (Polyetherimide, ULTEM™)
PEI (Polyetherimide) is an amorphous engineering thermoplastic offering exceptional mechanical, thermal and electrical properties. It can be easily machined with conventional metalworking tools, and can be painted, hot stamped, printed or metallized.
PETG (Polyethylene Terephthalate Glycol)
Polyethylene Terephthalate Glycol, or PETG, is a clear thermoplastic that can be formed into a number of shapes, making it suitable for use in a broad range of applications.
PI (Polyimide)
PI (Polyimide), is an imidized material with a continuous use temperature range of up to 580° F (304° C). It is categorized as an extreme performance material, and offers excellent heat resistance, lubricity, dimensional stability, and chemical resistance.
Polycarbonate
Polycarbonate, also referred to as PC, is a tough, impact-resistant, virtually unbreakable material used in wide variety of applications. It is an amorphous thermoplastic material, with a continuous use temperature range of up to 265° F (129° C).
Polyester (PET)
Polyethylene Terephthalate – known as PET or polyester — is a thermoplastic polyester that can be amorphous, crystalline, or a mixture of both, depending on how it is processed. All forms provide good chemical resistance and durability.
Polypropylene Twinwall – Corrugated Plastic
Polypropylene twinwall sheet, also known as fluted polypropylene, or simply as corrugated plastic, is an economical material that is light-weight and durable. In twinwall form, sheets are commonly used for both indoor and outdoor signage, as well as trade show and retail displays.
Polyurethane (PU)
Rigid polyurethane (PU) delivers a broad range of chemical resistance along with superior impact strength.
PPS (Polyphenylene Sulfide)
PPS (Polyphenylene Sulfide) is a tough, high-performance engineering thermoplastic featuring high dimensional stability.
PPSU (Polyphenylsulfone)
PPSU (Polyphenylsulfone) is an amorphous thermoplastic material, with a continuous use temperature range of up to 300° F (149° C).
PTFE (Polytetrafluoroethylene)
Polytetrafluoroethylene (PTFE) is a high molecular weight polymer with excellent thermal and electrical insulation properties, and a low coefficient of friction. It is a highly versatile plastic material useful in a broad range of high technology market segments and products, and its properties can be modified by additives such as glass fiber, carbon, or graphite.
PVC-Acrylic
PVC-Acrylic is a thermoformable, high-impact, fire-rated sheet for a variety of aerospace and industrial applications.
PVDF (Polyvinylidene Fluoride)
PVDF (polyvinylidene fluoride), sometimes known by the tradename Kynar®, is an engineering thermoplastic offering high purity, excellent chemical resistance, flame resistance, and abrasion resistance. Easy to weld, PVDF is often seen semiconductor equipment, tank liners, and various seals, fittings, valves, and pump parts.
Ultra High Molecular Weight Polyethylene (UHMW)
UHMW, also known as UHMW-PE (Ultra High Molecular Weight Polyethylene), is a semi-crystalline thermoplastic material, with a continuous use temperature range of up to 180° F (82° C).