ABS/PVC
ABS/PVC blend sheet, such as Boltaron, offers some of the best aspects of these two common thermoplastics. Excellent for thermoforming applications, it maintains high consistency from lot to lot fabricating, and uniformity in deep draws and sharp corners.
Digital Media – Floor Graphics
Whether you are looking for short-term solutions or more long-lasting materials, Polymershapes offers floor graphics grades specially formulated to suit your needs. Indoor grades are developed to handle extensive exposure to foot traffic, while outdoor grades are further enhanced to handle vehicular traffic and changing weather effects.
Foamboard and Paperboard
Foam and paper boards are staples of the sign and graphics industry. Lightweight and versatile, there are many options for these rigid, printable boards. Applications may include direct printed signage, dimensional lettering, mounting and backing for framing photographs and art, packaging, and more.
High Density Polyethylene (HDPE)
HDPE (High Density Polyethylene), part of the polyolefin family of materials, is a semi-crystalline thermoplastic material, with a continuous use temperature range of -50° F (-46° C) to 180° F (82° C).
High Impact Polystyrene (HIPS)
HIPS (High Impact Polystyrene), also known as PS (Polystyrene), is an amorphous thermoplastic material, used in lower heat applications. It is categorized as a standard material, and offers ease of processing, high impact strength, and stiffness.
Low Density Polyethylene (LDPE)
LDPE (Low Density Polyethylene), also known as a polyolefin material, is a semi-crystalline thermoplastic material, with a continuous use temperature range of up to 200° F (93° C).
PEEK (Polyetheretherketone)
PEEK (Polyetheretherketone) is a unique engineering thermoplastic offering high temperature resistance, toughness, rigidity, and creep resistance. It is resistant to a wide range of solvents, making it an excellent material for use in a wide spectrum of applications where thermal, chemical and combustion properties are critical to performance.
PEI (Polyetherimide, ULTEM™)
PEI (Polyetherimide) is an amorphous engineering thermoplastic offering exceptional mechanical, thermal and electrical properties. It can be easily machined with conventional metalworking tools, and can be painted, hot stamped, printed or metallized.
PETG (Polyethylene Terephthalate Glycol)
Polyethylene Terephthalate Glycol, or PETG, is a clear thermoplastic that can be formed into a number of shapes, making it suitable for use in a broad range of applications.
PI (Polyimide)
PI (Polyimide), is an imidized material with a continuous use temperature range of up to 580° F (304° C). It is categorized as an extreme performance material, and offers excellent heat resistance, lubricity, dimensional stability, and chemical resistance.
Polypropylene Sheet, Rod and Tube
Polypropylene (PP) is a semi-crystalline thermoplastic material, with a continuous use temperature range of -4° F (-20° C) to 212° F (100° C). It is categorized as a standard material, and offers excellent toughness, chemical resistance, and processability.
PPSU (Polyphenylsulfone)
PPSU (Polyphenylsulfone) is an amorphous thermoplastic material, with a continuous use temperature range of up to 300° F (149° C).
PVC-Acrylic
PVC-Acrylic is a thermoformable, high-impact, fire-rated sheet for a variety of aerospace and industrial applications.
PVDF (Polyvinylidene Fluoride)
PVDF (polyvinylidene fluoride), sometimes known by the tradename Kynar®, is an engineering thermoplastic offering high purity, excellent chemical resistance, flame resistance, and abrasion resistance. Easy to weld, PVDF is often seen semiconductor equipment, tank liners, and various seals, fittings, valves, and pump parts.
Silicone and Adhesives
Silicone sealants and adhesives are inert, synthetic compounds with a wide variety of forms and uses. They are typically heat-resistant and rubber-like.